Enginaire Pre-Cleaners!
GOOD IDEA! Keep your engines breathing clean air!!
$$ Save on your costs of operation! $$

Guarantee of Big Savings $$$$ on Engine operating costs

• $ave! up to 12 times the filter life

• $ave! self cleaning (no dust bowl to clean out)

• $ave! up to 10% on fuel costs

• $ave! up to 15% on oil costs

• $ave! up to 25% lower engine maintenance

ENGINAIRE precleaners are designed to remove most of the contaminants from the air
that feeds the engine. The advantages of removing these contaminants are extended filter
life, improved fuel economy and extended engine life. Turbochargers, blowers, cylinder
liners, piston rings and engine oil all fail because of contamination. The ENGINAIRE
precleaner is a precision manufactured product and a full range of models are available to
fit most engines.

INSIDE THE ENGINAIRE PRECLEANER Free engine intake air powers
the ENGINAIRE precleaner. Incoming air is drawn through the angled louver plates (1)
which direct the intake air to turn the stainless steel rotor (2) which is mounted on dual (2)
precision ground heavy duty bearings (3). The centrifugal force caused by the spinning
motion of the rotor separates the contaminants from the air, throwing them to the inner
perimeter of the cover (4) and expelling them out through the discharge port (5). The
clean dry air is drawn into the plenum chamber (6) and then into the engine (7).

---

HOW TO DETERMINE THE PROPER MODEL PRECLEANER

To determine the proper ENGINAIRE model the following procedure should be followed.
Refer to the equipment model listing. Verify the engine and aspiration. If the equipment
model is not listed or the engine is different refer to the engine listing to select the proper model
ENGINAIRE. You will need to know:

1. Engine model

2. Cubic inch displacement(C.I.D.)

3. Maximum engine operating R.P.M.

4. Aspiration (Naturally aspirated, Turbo-charged, Turbo-charged inner cooled
   or after cooled)

5. Measure outside diameter of the air intake pipe

6. Call Blue Ridge Diesel Injection, mention this Internet Special Page, provide us with
   the above information, and one of our sales professionals will be happy to assist you
   in determining the model to fit your application and determine the special price!!!
   To view application information prior to calling...Click on the following hyperlink
   to view the factory applications chart.
   FACTORY APPLICATIONS
   (Note: this link will open a new browser window.
   Simply close the new browser window when you are finished.)

---

Call (540) 389-7296

Send us your Order Now!

Back to top

United We Stand ... God Bless America!